PRIME COATING LIQUID FOR SELF SPREADING SMOOTHING ALUM

DESCRIPTION: Prime coating liquid for preparing of the floor ,to improve the adhesive properties & water proof.

SPECIFICATION: It is applied together with self spreading alum. It has speciality for elimination of bouble formation

APPLICATION AREAS: It is used as prime coating liquid for preparing of the base to prevent the water absorption of the surface & improve the adhesive property before application of the concrete ,plaster & alum.

SURFACE PREPARAETION: It is applied to the surface by brush or roll before floor application. Self spreading alum is applied after milky surface disappeared . It is used 2 layer for the surfaces which has high absorptivity.

CONSUMPTION:
100-150 GR/M2

TECHNICAL SPECIFICATION
Density : kg/lt 0.80
First layer appl.time: 20 min
Dry time : 60 min

STORAGE
Stored in the 10 lt plastic jerry can Under the dry , humidity free & frozen free circumference , in the originall cover Can be stocked 8 months after production date.

NOTIFICATION
Application should be recomended between +5 - +30 degree C
All equipment used should be cleaned by water
Protect the material from frezing
Harmfull for healt when swallowed

Note: The above given data are obtained under lab circumference .For more information please contact technical department.

Fixkim preserves the right of the revise of the information given above.
Our company shall have no responsibility for any demages caused by any misusing & wrong application