FIXHARC  PREPARED MORTAR

DESCRIPTION:
Cement base, prepared mortar.

SPECIFICATIONS :
To save time & man power. Should be prepared mortar.

APPLICATION AREAS:
At the interior and exterior areas it is used to obtain finished smooth surface .

SURFACE PREPARATION:
Surface should be tough & clean. Purified from paint, dust etch materials which will decrease the adherence. Rough surfaces should be repaired by Fixkim repair mortar. Surface should be moistured before application.

PREPARED MORTAR AND APPLICATION:
30 kg. Fixharç and 4, 5 lt. water are put in a container and mixed. By using alum helezone spread on thickness 2-3 mm surface. Application surface should be moistured for 7 days.

NOTIFICATION:
Can not be added anything (Lime, Cement, Gypsum etch. ) to Fixkim alum. Expired fixkim alum can not be used. Since it is a cement base material, direct contact of hands should be avoided. Gloves should be worn.

STORAGE:
Under the dry & humidity free circumference in the original cover Can be stocked 8 months with a stacking not exceed 10 tiers. Should be consumed in 7 days after cover is open.

CONSUMPTION:
For 1 cm thickness 20 kg. /m²

TECHNICAL SPECIFICATION

Density : 1450 ± 100 kg/m³
Wet unit weight : 1900 ± 150 kg / m³
Average Compression strength: 60 N / mm²
Average Bending strength :>102 N / mm²
Application Temp : +5Cº / +30 Cº